Continuous Rotary Abrasion Peeler – Model Giant – Stainless.
The GIANT Peeler is manufactured of stainless steel with 36 rotaty rollers built into a round rotary shaped frame with one central screw placed inside the rotary drum.
The screw is for controlling the time inside the peeling drum. This takes place by using a frequency inverter connected to the gear drive of the screw.
All rotary abrasive rollers can be exchanged very fast due to special bajonet connection system. Each roller is equipped with a V-belt drive wheel in order to adjust the speed for all the abrasive peeling rollers by means of a separate frequency inverter.
All the abrasive rollers are placed into round rotary frame, thus framing/forming all rollers as a drum with sprocket operated chain drive operation, and with a large screw placed in the middle for control of peel-time.
DIMENSIONS OF GIANT PEELER:
Length: 3.380 mm
Width: 1.900 mm
Height: 3.500 mm (incl. gearmotor on top of machine)
The effecicency of the GIANT Abrasive Peeler is due to the fact that 3 (three) parts are rotating:
- All 36 abrasive rollers are ROTATING
- The total Drum of all rollers is ROTATING
- The Screw in the middle of the Drum is Rotating
And all 3 (three) parts are individually speed/rotation adjustable by means of frequency inverters.
This uniq triple rotating makes the peeling very efficient due to the fact that the product is constantly in motion, thus tumbling down at another position.
The total Drum is covered be a very HEAVY DUTY Frame with covers along each side, which can be opened manually for inspection/cleaning.
For collection of the peelwaste/offal the machine is equipped with V-angled collection funnel down to a long opening for drain to below placed canal or alternatively it can be equipped (against extra costs) with a long separate waste screw discharging at one end.
The machine is equipped with magnetic operating valve for flushing plastic bearings automatically.
The machine is delivered with one Electrical Panel including necessary safty-relays as well as all internally cabling/wireing of the Frequency inverters and sensors.
Some customer are using a number of nylon brush rollers mixed into the abrasive rolles.
This brush rollers with relative “stiff” blue plastic brus hair will help to “rip” off the peel, thus getting the abrasive rollers to operate/peel even better.
We could suggest to equip the GIANT Peeler with up to 9 (nine) Brush Rollers placed stratecically into the other rollers.
Further we can offer:
- Waste/offald screw placed below the funnel of the machine.
- Platform placed at one side of the machine